Short Description:
Possible cut of circular truncation in walls (4040) (4027). Circular cut with very steep sides and a flat base. The break of slope at the top and base was sharp.Cuts through wall 4027 and wall 4040.
Issued to
David Wallace | 21/04/2021
Interpretation
-
- This is the cut of a circular feature that was made into wall 4027, 4039 and 4040. Its purpose is unknown, however at a later date a blockage was made to form a continuation of wall 4027 and abutting wall 4040 to create a smaller aperture, meaning this feature was adapted for use at a later date. Possible uses could include some form of drain or garderobe chute, alternatively a hole for some form of structural support.
-
- Ben Swain
- 26-4-2021
Sketch Photo
Description
- Circular
- Length - 0.90m Width - 0.80m Depth - 0.70m
- Sharp
- Very steep
- Sharp
- Flat
- Cuts through wall 4027 and wall 4040
Finds
Feature
-
Feature: MDC_405
- Circular pit or drain in the SE corner of trench 4
Site Photos
-
Photo: MDC_211631
- Showing that the hole 4044 4049 goes to the other side in wall 4027 MDC21_21-04-20_CAM02_IMG125421.jpg
-
Photo: MDC_211632
- Showing that the hole 4044 4049 goes to the other side in wall 4027 MDC21_21-04-20_CAM02_IMG125431.jpg
-
Photo: MDC_211634
- David pointing to hole 4044 4049 in wall 4027 MDC21_21-04-20_CAM02_IMG125513.jpg
-
Photo: MDC_211650
- Photo of hole 4049 4044 in wall 4027 MDC21_21-04-22_CAM02_IMG165046.jpg
Plan
Record Details
- Not set
- David Wallace 21-4-2021
- - - - -
- - -